$199.99/Each
Ships free with PlusEarn up to $6.00 back (600 points)with a Webstaurant Rewards Visa® Credit Card
Other Available Types:
Product Overview
- 0.5 GPM flow rate
- Deck-mounted design with an 18" stainless steel supply line
- (2) 18" stainless steel supply lines use 1/2" NPSM x 3/8" female fittings
- Solid chrome-plated brass construction for long life
- Includes AC adapter and control module; can operate on batteries
Works With"Works With" items are guaranteed to work with the item you are viewing, such as lids that will fit a cup or casters that will fit a piece of equipment. If an item is not listed in this section, we do not guarantee that it will work with the product you are viewing and do not recommend that you purchase them for use together.
- Quantity
- 1/Each
- Shipping Weight
- 6.2 lb.
- Spout Length
- 5 1/2 Inches
- Faucet Height
- 8 Inches
- Battery Type
- AA
- Faucet Centers
- Single
- Features
- ADA Compliant California AB100 Compliant Flex Inlets Included Hands Free
- Finish
- Chrome
- Flow Rate
- 0.5 GPM
- Material
- Brass
- Mounting Holes Required
- 1 Mounting Hole
- Mounting Style
- Deck Mounted
- Plug Type
- NEMA 1-15P
- Power Type
- AC Adapter Battery
- Pressure Rating
- 60 PSI
- Spout Clearance
- 5 5/8 Inches
- Spout Type
- Gooseneck
- Temperature Rating
- 194 Degrees Fahrenheit
- Type
- Touchless Faucets
- Water Inlet Size
- 3/8 Inches
Customer questions about this product
Can I change the sensing distance on my faucet?
The sensing distance on the faucet is pre-set; however, it can be further adjusted following these easy steps. Begin by pressing and holding the on/off button on the control module for about five seconds. The water will flow for a moment, and the LED light on the sensor will flash on and off as the water flow stops. Release the on/off button and place your hand at the chosen distance from the sensor. The LED light will flash ten times, then stay illuminated on the tenth flash to tell you that the range setting has been saved.
Can I use this product to serve drinking water?
This product is not intended for use in applications where potable (drinking) water is dispensed for human consumption.
What measurements do I need to install a faucet?
When installing a faucet, these are some of the most common measurements you’ll need:
Faucet Centers: If your faucet has a base with 2 inlets, measure the distance from the center of one inlet to the center of the other. This number must match the spacing of your building’s water lines (adjustable centers will help with the spacing). If mounting through the backsplash on a sink, the center measurement must also fit within the pre-drilled mounting holes.
Flex Hoses: If your faucet has flex hoses make sure that they will reach your building’s water lines.
Spout length: Make sure that the faucet spout will fit comfortably over your sink bowl and not extend too far / not far enough. If you plan to use a swing spout over a multi-bowl sink, make sure it will reach all of the bowls.
Details
This Waterloo deck-mount hands-free sensor faucet is the perfect solution when you need a dependable water fixture for your facility's restrooms and hand-washing areas! It features a 5 1/2" long gooseneck spout with a chrome-plated finish and an attractive rounded base to provide a contemporary and refined look wherever it's installed. Additionally, the spout features a surgical bend design that is perfect for healthcare applications.
This unit has an infrared proximity sensor with a 30 second timeout feature and an adjustable range of 2-21 cm. Because a sensor activates the water flow, it has several advantages over a traditional handle-style faucet. It is hands-free, which reduces the opportunity for germs to spread, and it also prevents the faucet from running when it's not needed, which helps to cut down on your water bill.
The AC adapter with a Level VI efficiency rating is included to provide power for the faucet's control module, which installs below the countertop and connects to the faucet with an 18" flexible supply line. Or, you can also use (4) AA batteries if an outlet isn't convenient and to provide backup power in case of an outage. A mixing valve also allows you to easily set the output temperature to the desired level. This prevents burned hands from water that is too hot while still ensuring that the water is warm enough for users to effectively wash their hands. A pair of 18" flexible stainless steel connectors with 1/2" NPSM female x 3/8" female compression fittings connect the mixing valve to your building's water lines.
Waterloo sensor faucets provide the industry-leading quality you expect. With heavy chrome-plated brass faucet bodies and certifications from a wide range of national and local regulatory agencies, you can install this model with confidence. And to give you total peace of mind, it comes with a 3-year replacement warranty.
Overall Dimensions:
Spout Length: 5 1/2"
Faucet Height: 8"
1-15P
This unit comes with a NEMA 1-15P plug.
ADA Compliant
This item meets criteria established by the Americans with Disabilities Act (ADA).
3/8" Water Connection
This unit comes with a 3/8" water connection for water supply.
Need Parts & Accessories?
Shop replacement parts and accessories for this item today!
Resources and Downloads
A PDF viewer is required to view this product's information. Download Adobe Acrobat software
Resources